Swing arm lock nut removal tool
Swing arm lock nut removal tool
Is there anybody near bolton has a castle type swing arm lock nut removal tool.
If not I'm taking a grinder to a 30mm socket
Sent from my E6853 using Tapatalk
If not I'm taking a grinder to a 30mm socket
Sent from my E6853 using Tapatalk
- allannorman
- Reactions:
- Posts: 25
- Joined: 30 Mar 2015, 21:59
- Location: Liverpool
Re: Swing arm lock nut removal tool
tried tapping it loose with a drift?
Re: Swing arm lock nut removal tool
Hammer and big screwdriver no joy
Sent from my E6853 using Tapatalk
Sent from my E6853 using Tapatalk
Re: Swing arm lock nut removal tool
Is the outer castellated part separate from the inner that takes a hex key?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Swing arm lock nut removal tool
U don't have to remove the castle nut if u use a front axel key tool
Re: Swing arm lock nut removal tool
I have axle tool you sure there not opposite locking as it has hex both sides of swing arm???Marco wrote:
U don't have to remove the castle nut if u use a front axel key tool
Sent from my E6853 using Tapatalk
Re: Swing arm lock nut removal tool
Seperatelee wrote:Is the outer castellated part separate from the inner that takes a hex key?
Sent from my iPhone using Tapatalk
Sent from my E6853 using Tapatalk
Re: Swing arm lock nut removal tool
@Marco cheers pal it's out, thought on plus side castle nut still on so no over tightening
Sent from my E6853 using Tapatalk
Sent from my E6853 using Tapatalk
Re: Swing arm lock nut removal tool
No worries it's how I did mine and yea u don't need to take the castle nut off but if it moves then u won't be torquing it properly u will just do the castle nut to the frame.SMUDGER wrote:@Marco cheers pal it's out, thought on plus side castle nut still on so no over tightening
Sent from my E6853 using Tapatalk
Re: Swing arm lock nut removal tool
Looks like engine needs to come out this alternator is not going to come out the back wayMarco wrote:No worries it's how I did mine and yea u don't need to take the castle nut off but if it moves then u won't be torquing it properly u will just do the castle nut to the frame.SMUDGER wrote:@Marco cheers pal it's out, thought on plus side castle nut still on so no over tightening
Sent from my E6853 using Tapatalk
Sent from my E6853 using Tapatalk