Bandit Refurb

Share any projects that you've undertaken, or modifications made to your bike.
SMUDGER
VIP
Reactions:
Posts: 1324
Joined: 30 Mar 2015, 14:19
Re: Bandit Refurb

Post by SMUDGER » 22 Apr 2015, 21:58

was that m8s rates or normal rates as got a yammy 600r head i need doing

User avatar
lee711
Reactions:
Posts: 142
Joined: 30 Mar 2015, 17:39
Re: Bandit Refurb

Post by lee711 » 23 Apr 2015, 08:46

SMUDGER wrote:was that m8s rates or normal rates as got a yammy 600r head i need doing
Normal rate. I provided them with the valve stem oil seals.

SMUDGER
VIP
Reactions:
Posts: 1324
Joined: 30 Mar 2015, 14:19
Re: Bandit Refurb

Post by SMUDGER » 23 Apr 2015, 10:36

lee711 wrote:
SMUDGER wrote:was that m8s rates or normal rates as got a yammy 600r head i need doing
Normal rate. I provided them with the valve stem oil seals.
can you pm me there details sounds very reasonable

User avatar
lee711
Reactions:
Posts: 142
Joined: 30 Mar 2015, 17:39
Re: Bandit Refurb

Post by lee711 » 04 May 2015, 16:38

So the frame, swingarm, center stand and wheels are at the powdercoaters and today i removed 2 of the 4 linkage bearings, these were in a pretty bad state,
Image
the center bearings however, were in an unbelievable condition, it was difficult enough to get the spacer out, but the bearings are going need pressing out at the bike shop.
New set should be here mid week.
Image
Image
Also cleaned up and enamel sprayed the suspension dog bones.
Image

User avatar
lee711
Reactions:
Posts: 142
Joined: 30 Mar 2015, 17:39
Re: Bandit Refurb

Post by lee711 » 16 May 2015, 19:30

Picked up the frame, wheels, center stand and swing arm from the powdercoaters today. Unfortunately the blasting revealed hidden damage to the swing arm, 2 big lumps of filler one on each side meant i've had to order a replacement. The rest of the items came out spot on.

Frame with center stand re-fitted.
Image

Wheels with bearings and bits re-fitted.
Image
Image

The damaged swingarm.
Image
Image

User avatar
bloke
Reactions:
Posts: 255
Joined: 29 Mar 2015, 21:56
Re: Bandit Refurb

Post by bloke » 16 May 2015, 20:33

think i've got a swingarm if you need one.

User avatar
lee711
Reactions:
Posts: 142
Joined: 30 Mar 2015, 17:39
Re: Bandit Refurb

Post by lee711 » 16 May 2015, 20:34

Damn....... just bought one off egay mate.

User avatar
bloke
Reactions:
Posts: 255
Joined: 29 Mar 2015, 21:56
Re: Bandit Refurb

Post by bloke » 16 May 2015, 21:10

always the bloody way!! want any polished bits?

User avatar
lee711
Reactions:
Posts: 142
Joined: 30 Mar 2015, 17:39
Re: Bandit Refurb

Post by lee711 » 16 May 2015, 22:02

Cheers Carl, i'll give you a shout. Image might need a hand getting a couple of swingarm bearings out if you can assist mate.

User avatar
bloke
Reactions:
Posts: 255
Joined: 29 Mar 2015, 21:56
Re: Bandit Refurb

Post by bloke » 16 May 2015, 23:10

yeah, no problem.


Post Reply