Page 3 of 5

Re: Bandit Refurb

Posted: 22 Apr 2015, 21:58
by SMUDGER
was that m8s rates or normal rates as got a yammy 600r head i need doing

Re: Bandit Refurb

Posted: 23 Apr 2015, 08:46
by lee711
SMUDGER wrote:was that m8s rates or normal rates as got a yammy 600r head i need doing
Normal rate. I provided them with the valve stem oil seals.

Re: Bandit Refurb

Posted: 23 Apr 2015, 10:36
by SMUDGER
lee711 wrote:
SMUDGER wrote:was that m8s rates or normal rates as got a yammy 600r head i need doing
Normal rate. I provided them with the valve stem oil seals.
can you pm me there details sounds very reasonable

Re: Bandit Refurb

Posted: 04 May 2015, 16:38
by lee711
So the frame, swingarm, center stand and wheels are at the powdercoaters and today i removed 2 of the 4 linkage bearings, these were in a pretty bad state,
Image
the center bearings however, were in an unbelievable condition, it was difficult enough to get the spacer out, but the bearings are going need pressing out at the bike shop.
New set should be here mid week.
Image
Image
Also cleaned up and enamel sprayed the suspension dog bones.
Image

Re: Bandit Refurb

Posted: 16 May 2015, 19:30
by lee711
Picked up the frame, wheels, center stand and swing arm from the powdercoaters today. Unfortunately the blasting revealed hidden damage to the swing arm, 2 big lumps of filler one on each side meant i've had to order a replacement. The rest of the items came out spot on.

Frame with center stand re-fitted.
Image

Wheels with bearings and bits re-fitted.
Image
Image

The damaged swingarm.
Image
Image

Re: Bandit Refurb

Posted: 16 May 2015, 20:33
by bloke
think i've got a swingarm if you need one.

Re: Bandit Refurb

Posted: 16 May 2015, 20:34
by lee711
Damn....... just bought one off egay mate.

Re: Bandit Refurb

Posted: 16 May 2015, 21:10
by bloke
always the bloody way!! want any polished bits?

Re: Bandit Refurb

Posted: 16 May 2015, 22:02
by lee711
Cheers Carl, i'll give you a shout. Image might need a hand getting a couple of swingarm bearings out if you can assist mate.

Re: Bandit Refurb

Posted: 16 May 2015, 23:10
by bloke
yeah, no problem.