Project bike in the post
Re: Project bike in the post
Proper clamping and drill press speed along with a suitable coolant or cutting fluid required
Revving the bollox off it since 1982
Re: Project bike in the post
And decent bits.
To be fair high tensile bolts can be a right cunt.
The minute you go too quick you have burned out the bit.
Good luck.
Sent from my iPhone using Tapatalk
To be fair high tensile bolts can be a right cunt.
The minute you go too quick you have burned out the bit.
Good luck.
Sent from my iPhone using Tapatalk
Re: Project bike in the post
I give up I really do I persevered with it as much as I can I know own every different type of bolt and screw extractor you can three new torque wrenches all sorts..
Taking too long it's time to cut the head off...second hand head £30 so not bad I spent mire than that on one tool lol
Sent from my E6853 using Tapatalk
Taking too long it's time to cut the head off...second hand head £30 so not bad I spent mire than that on one tool lol
Sent from my E6853 using Tapatalk
Re: Project bike in the post
Pics of the surgical removal please.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Project bike in the post
Worst idea ever lol it will take days to get to that back bolt if it was front bolts easy peasey.. I'm officially calling it a day and will now be taking the 90k heart out and transplanting a 30k heart in its place.lee wrote:Pics of the surgical removal please.
Sent from my iPhone using Tapatalk
And put all the upgrades on that.
That is unless I get a good offer for someone who is willing to break it
Sent from my E6853 using Tapatalk
- rumpoldstilskin
- VIP
- Reactions:
- Posts: 2042
- Joined: 31 Mar 2015, 22:31
Re: Project bike in the post
these are good, and now all that swarf is in there it needs to come out.SMUDGER wrote:Went through 3 cobalt drill bits 9 titanium drill bits and this is all it did
Sent from my E6853 using Tapatalk
http://www.screwfix.com/p/erbauer-bolt- ... 0wodzUsHwg
You do not have the required permissions to view the files attached to this post.
Re: Project bike in the post
I have them only got one out you should see the damage now lmfaorumpoldstilskin wrote:these are good, and now all that swarf is in there it needs to come out.SMUDGER wrote:Went through 3 cobalt drill bits 9 titanium drill bits and this is all it did
Sent from my E6853 using Tapatalk
http://www.screwfix.com/p/erbauer-bolt- ... 0wodzUsHwg
Sent from my E6853 using Tapatalk
- rumpoldstilskin
- VIP
- Reactions:
- Posts: 2042
- Joined: 31 Mar 2015, 22:31
Re: Project bike in the post
Also slightly tighten the next bolt if you can. Will take a small amount of pressure off the stuck one
Re: Project bike in the post
Done all that trust me it's fookedrumpoldstilskin wrote:Also slightly tighten the next bolt if you can. Will take a small amount of pressure off the stuck one
Sent from my E6853 using Tapatalk
- rumpoldstilskin
- VIP
- Reactions:
- Posts: 2042
- Joined: 31 Mar 2015, 22:31
Re: Project bike in the post
other than getting it clean, a collar and new longer stud welded onto it to make access easier i'm completely out of ideas.